Product details

Product name：Single Sliding injection moulding machine
Product number：MH-15T
Market price：

MH Standard Machine Series
Clamping force:10T to 500T
Injection weight: 35g to 850g
Vertical four columns clamping,
vertical injection
Suitable for insert injection molding process.
We can upgrade to servo motor for customer's need.
The actual energy save 50%~ 70%.

INJECTION UNIT		mm	Φ26	Φ28
	Screw Diameter
		kgf/cm2	1715	1098
	Injection Pressure
		㎝3	55	65
	Theoretical Injection Volume
		g(oz)	51.2/1.8	59.4/2.0
	Max.. Shot Weight
		cm3/s	50	59
	Injection Rate
		mm	105
	Screw Stroke
		rpm	0~215
	Screw Speed Rotation
			2
	Stages of temperature control
CLAMPING UNIT		Tons	15
	Clamping Force
		mm	280*250
	Platen Size
		mm	310
	Distance Between Tie Bars
		mm	35
	Min.Mold Thickness
		mm	198
	Opening Stroke
		mm	233
	Max.. mould Opening Distance
		kN(tf)	1.3
	Ejector Force
		mm	35
	Ejector stroke
HYDRAULIC SYSTEM		kgf/cm2	140
	Max.Hydaulic Pressure
		cc/rec	23
	Oil pump output
		L/h	400-600
	Cooling Water Consumption
		KW	2.2(3HP)
	Pump Motor Power
		kW	2
	Barrel heating Power
		kW	4.2
	Total wattage
		Kg	650.0
	Machine Weight
OTHERS		M	1.150.752.15
	Machine Dimensions(LWH)
		Kg	650.0
	Shipping Weight Gross
		M	1.41.02.3
	Shipping dimensions(LWH)

Most of plastic injection molding machines are horizontal. but, there are also some vertical injection molding machines. The difference is that: for the horizontal injection molding machine, the molds should be put onto the machine , with left half and right half. for the vertical injection molding machine the molds should be put onto the machine vertically, with top half and bottom half.

Injection system is one of the most important parts of injection molding machine. There are 3 main forms: plunger type, screw type, screw pre plastic plunger injection type. Screw type is the most used at present.

Vertical injection molding machines function the same as traditional horizontal machines. But they are orientated to operate on the vertical axis. This type of machine is available in hydraulic, electric and hybrid executions to meet a range of customer requirements.

Vertical injection molding machines must very little floor space due to the orientation of the machine. Vertical injection molding machines are particularly suited for insert molding applications. Components can be easily loaded into the mold and held in place by gravity before over molding.

Vertical injection molding machines often incorporate a shuttle. Or rotary table, allowing loading and demolding within the machines cycle time.